This process is used for jio phone blinking problem, dead recovery, network issue, invalid or 0 IMEI etc. at first install the drivers, install the qfil tool & open it, Select and set the programmer, xml file and set the configuration as described in video, Switch off the phone and re insert the battery, Press the volume up & down button of the phone and connect with usb cable, after installation of driver press the download button, after download finish quickly open the IMEI tool and put the imei number (Same IMEI in 2 Slots) please follow the driver already installed (COM PORT), Press the start button, it shows pass then your IMEI is done.
Comments