Samsung S3850/Corby ll flashing, Dead recovery/software upgrade
Dosto is video main may ap logo ko samsung Corby ll/S3850 ka software flashing kaise kiya jata hay o dikhiya hu.Agar ap ka phone samsung logo par hang ho raha ho or boot nehi ho raha ho ya dead ho to ap is method ko follow kar sakte ho.
Tools and Files required
Firmware Files for Samsung Corby II/S3850
MultiLoader V5.67
Samsung Kies
Steps to follow
- At first remove the battery and check the Battery Voltage
- Battery voltage must above 3.75 Volt
- Remove Sim Card and Memory Card if available
- Download Samsung Kies and install it to your PC
- Download the Firmware file and Flash Tool and extract it.
- Open the MultiLoader Tool
- Select BRCM2133 in Control
- Click on Boot Change option and select the boot file from the firmware folder
- Now uncheck the Boot change option
- Select Apps File from Firmware folder
- Select Rsrc1 File from Firmware folder
- Select Rsrc2 Medium file from the Firmware folder
- Select Factory FS file from the firmware folder
- Now select SHP APP from the firmware folder
- Select CSC file from the firmware folder
- Now Press the Volume UP key, Call Key, and Power Key at a time for 5 sec
- If Logo comes then You are In Download Mode
- Plug in the USB in Phone
- Click On Port Search option and confirm for COM Port
- Check on Full download option
- And now press Download Button
- Process starts now wait for finish
- After finishing the process, the phone will restart.
- After powering on you have to do a factory reset with this code *2767*3855#.
Comments